- This topic has 2 replies, 2 voices, and was last updated 4 years, 4 months ago by
.
-
Posts
-
Evening folks, whilst I’m sat waiting for the latest round of epoxy to do it’s thing I thought I’d do a little update! So here’s the template and build of a little cuddy to sit behind the anchor locker, it also provides some strength to the bow in the area the windlass sits, the eagle eyed among you will notice that I changed my mind halfway through… All will become clear! #mystery!
Good Work!
Attachments:
Afternoon all, it took a ridiculous amount of faffing but we got the bulkhead for the anchor locker made last night, the slightly rustic (wonky) cubby made it a bit of a challenge to get it to sit in straight* but we (mostly John) struggled on and in the end we got it close enough!
*the term straight, when used in the context of Merganser is a variable that is very difficult to apply mainly due to the inside of the hull being a bit rustic and the deck being 10mm to port at the bow and 14mm to starboard at the stern in relation to a laser line. We decided on using the beam I installed a few weeks ago as a datum for all future measurements as it “looks about right”.
- You must be logged in to reply to this topic.